1
ICS号:21.220.10
ICS No.: 21.220.10
中国标准文献分类号: C34 通用设备 制造业
Chinese Classification for Standards: C34 General Equipment Manufacturing
团体标准
Group standard Association Standard
T/ GJSH000010 —2020
交叉带式分拣机市场需求范本
Market Requirement Document for Cross -belt Sort er
中英文对照版
Chinese /English Bilingual Version
2020 - 12- 17发布
Issued on Dec 17 , 2020
2020 - 12- 24实施
Implemented on Dec 24 , 2020
上海市工商联国际物流商会 发布
Issued by Shanghai Federation of Industry and Commerce (SFIC)
International Logistics Chamber of Co mmerce 全国团体标准信息平台
2 目 次 Table of Contents
前 言 Foreword ................................ ................................ ................................ ............................... 3
1 范围 Scope ................................ ................................ ................................ ................................ ...... 5
2 规范性引用文件 Normative References ................................ ................................ .......................... 5
3 术语和定义 Terms and Definitions ................................ ................................ ................................ .. 5
4 功能需求 Functional Requirements ................................ ................................ ................................ 7
5 附录 Annex ................................ ................................ ................................ ................................ .. 17
全国团体标准信息平台
3 前 言 Foreword
本标准按照 GB/T1.1给出的规则起草。
This standard is drafted according to the rules stipulated in GB/T1.1.
本标准由上海市工商联国际物流商会提出。
This standard is put forward by SFIC Internatio nal Logistics Chamber of Commerce.
本标准由上海市工商联国际物流商会归口。
This standard is managed by SFIC International Logistics Chamber of Commerce.
本标准起草单位:上海市工商联国际物流商会、顺丰泰森控股(集团)有限公司。
This standard is drafted by: SFIC International Logistics Chamber of Commerce , SF Tyso n
Holdings (Group) Co., Ltd.
本标准主要起草人:邵钟林、陈重文、吴东、肖玉茗、左文、王阳、徐海堰。
This standard is mainly drafted by: Shao Zhonglin, Chen Chongwen, Wu Dong, Xiao Yuming,
Zuo Wen, Wang Yang and Xu Haiyan.
本标准英文翻译人:蔡熙、吴鸿杰。
This standard is mainly drafted by: Shao Zhonglin, Xiang Feng, Zheng Chunlei, Hu Bin, Sun
Jianying.
本标准英文翻译审校人:蔡绍源。
This standard is translated in English by: Cai Xi, Wu Hongjie.
全国团体标准信息平台
4 交叉带式分拣机市场需求范本 Market Requirement Document for
Cross -belt Sorter
1 范围 Scope
本标准给出了交叉带式分拣机的基本要求、使用需求、安全要求及设备技术要求等内容。
This standard s ets forth the basic requirements, operation requirements, safety requirements
and equipment technical requirements of cross -belt sorter.
本标准适用于邮政快递行业的自动化分拣设备。制造商生产交叉带分拣机时可参照使用。
This standard is applicable to the automatic sorting equipment of post and exp ress industry. The
manufacturer can refer to it while manufacturing cross -belt sorter.
2 规范性引用文件 Normative References
下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅所注日期的版本适用于本文
件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
The following documents are indispensable to the applicatio n of this document. For dated
references, only the dated version s apply to this document. For undated references, the latest
version s (including all amendments) apply .
GB/T 18354 -2006 物流术语
GB/T 18354 -2006 Logistics terms
GB/T 27917.1 -2011 快递服务 第1部分:基本术语
GB/T 27917.1 -2011 Express service - Part 1: Basic terminology
GB/T 35738 -2017 物流仓储配送中心输送、分拣及辅助设备 分类和术语
GB/T 35738 -2017 Logistics warehousing distribution center conveyor, sorting and peripheral
equipment - Classification and terminology
3 术语和定义 Terms and Def initions
下列术语和定义适用于本文件。
The following terms and definitions apply to this document.
3.1 交叉带式分拣机 Cross -belt sorter
通过带式小车实现物品分拣的设备,按布局形式可分为:直线型、环形、 L型、C型等形式。
In terms of layout form, the equipment for achieving item sorting through belt carrier can be
classifie d into linear type, loop type, L type, C type and so on.
[GB/T 35738 -2017,定义 2.2.1.3]。又可分为单层及多层,多层处理能力为单层倍数,格口数量相
同。
[GB/T 35738 -2017, Definition 2.2.1.
T-GJSH 000010—2020 交叉带式分拣机市场需求范本 中英文对照版
文档预览
中文文档
34 页
50 下载
1000 浏览
0 评论
0 收藏
3.0分
温馨提示:本文档共34页,可预览 3 页,如浏览全部内容或当前文档出现乱码,可开通会员下载原始文档
本文档由 思安 于 2022-12-15 01:57:58上传分享